Skip Ribbon Commands
Skip to main content
Dr. Mohammad Mujahid-(on leave)
Professor
Materials Engineering.

SCME
National University of Sciences and Technology (NUST)
H12, Islamabad.
Tel :  

Specialization
Nano and Biomaterials, Phase Transformations, Structure-Property Relationships, Materials Characterization.

Education
D.Phil, University of Oxford.

  • ​Mohammad Mujahid received his PhD in Materials Engineering from the University of Oxford UK, MS in Metallurgical Engineering from the University of Pittsburgh USA, and, a BSc in Metallurgical Engineering from UET Lahore.

  • He has over 20 years of teaching and research experience while working as faculty member at places such as Department of Aeronautics & Astronautics (IST, Islamabad), School of Materials Science & Engineering, (Nanyang Technological University, Singapore), Department of Mechanical Engineering (International Islamic University, Malaysia) and Faculty of Metallurgy & Materials Engineering (GIK Institute, Topi).

  • He was also a postdoctoral fellow at the Department of Materials (University of Oxford) working on the recrystallization behavior of ODS Super alloys under the European project COST-501. His areas of specialization include electron microscopy, phase transformations, synthesis & characterization of nano and bio materials and structure-property relationships in materials.

  • His current research work involves projects like deposition of engineering thin films and hard coatings, synthesis and characterization of nano-porous and nano-composite materials for biomedical applications, nanomaterials for next generation solar cells, high-temperature materials for jet turbine engines.

  • Dr. Mujahid has published more than 100 papers in refereed international journals and conference proceedings.​

 

Current Research Funding (NUST, USAID, HEC and Planning Commission: approx. Rs. 65 million)

  • Development of Biomaterials: Nano Hydroxyapatite, Nano-porous & nano-composite materials for biomedical applications. (PI, Funded Project)

  • Thin-film solar cells based on CIGS and CZTS. (PI, Funded Project)

  • Development of dye-sensitized solar cells (DSSC) using nano materials.

  • Development of thin-films for self-cleaning and low-emissivity glass. (PI, Funded Project)

  • Development of membrane technologies for filtration CO2 capture. (Co-PI, Funded Project)

  • Engineering thin films and hard coatings for textile industry 

  • Recrystallization and grain growth studies in high-temperature materials 

  • Texture studies of Ni-based super alloys using electron backscattered patterns (EBSP) in SEM

  • Computer modelling of grain growth using Monte Carlo techniques

  • Nano-structured magnetic materials for soft magnetic applications

  • High temperature oxidation behavior of Ni-based super alloys

  • Tribological properties of hard metallic alloys and composites​

INTERNATIONAL JOURNALS​

  • M. Mujahid and J.W. Martin: The Development of Microstructure and Texture during the Zone Annealing of the Mechanically Alloyed ODS Material: MA6000, Materials Science Forum, vols. 94-96, 1992, pp 455-460.

  • M. Mujahid and J.W. Martin: The Development of Microstructure and Texture during the Zone Annealing of the Mechanically Alloyed ODS Material: MA760, Materials Science Forum, vols. 113-115, 1993, pp 263-268.

  • M. Mujahid, A.K. Lis, C.I. Garcia and A.J. DeArdo: HSLA-100 Steels: Microstructure and Properties, Key Engineering Materials, vol. 84-85, 1993, pp209-236.

  • M. Mujahid and J. W. Martin: The Effect of Oxide Particle Coherency on Zener Pinning in ODS Superalloys, Journal of Materials Science Letters (now merged in Journal of Materials Science), vol. 13, 1994, pp 153-155. DOI: 10.1007/BF00278146

  • M. Mujahid and J. W. Martin: Development of Microstructure of High Grain Aspect Ratio During Zone Annealing of Oxide Dispersion Strengthened Superalloys, Materials Science & Technology, vol. 10, 1994, pp 703-710.

  • M. Mujahid, A. K. Lis, C. I. Garcia and A. J. DeArdo, HSLA-100 Steels: Influence of Aging Heat Treatment on Microstructure and Properties, Journal of Materials Engineering and Performance, vol. 7 (2), 1998, pp 247-257.

  • M. Mujahid, C. Gater and J. W. Martin, Microstructural study of a Mechanically Alloyed ODS Superalloy, Journal of Materials Engineering and Performance, vol. 7(4), 1998, pp 524-532.

  • M. Mujahid, M. I. Qureshi and M. Ali, Development of Microstructure During Heat Treatment of a High-C, Cr-Mo Steel, Materials Science and Technology, vol. 15, No. 4, 1999, pp 391-395.

  • M. Mujahid, M. I. Qureshi, M. Islam and A. A. Khan, Processing and Microstructure Of Alumina Based Composites, Journal of Materials Engineering and Performance, vol. 8(4), 1999, pp 496-500.

  • M. I. Qureshi and M. Mujahid, An Optimal Heat Treatment Cycle for a 26Cr, 2Mo Stainless Steel, Journal of Materials Engineering and Performance, vol. 9(3), 2000, pp 261-265.

  • M. Mujahid, S. H. Sim and J. Zhu, Mechano-synthesis and Characterization of Fe-Co Based Nanocrystalline Magnetic Materials, Materials Science Forum, vol. 475-479, 2005, pp 3567-3570.

  • K. Then, M. Mujahid and B. Zhang, Development of Wear Resistant Zirconium Oxide Thin Films on Stainless Steel Substrates, Materials Science Forum, vol. 475-479, 2005, pp 3915-3918.

  • M. Mujahid and I. Friska, Influence of Mechanical Milling on the SiC Particulate Size in an Al-SiC Composite, Journal of Materials Engineering and Performance, vol. 14 (1), 2005, pp 69-74.

  • Y. L. Brama, Y. Sun, S. R. K. Dangeti and M. Mujahid, Response of Sputtered Titanium Films on Silicon to Thermal Oxidation, Surface and Coatings Technology, vol. 195 (2-3), 2005, pp 189-197.

  • K. Then, M. Mujahid and B. Zhang, Effect of Processing on the Structure and Wear Properties of Sputtered Zirconium Oxide Thin Films, Surface and Coatings Technology, vol. 198 (1-3), 2005, pp 104-109.

  • J. Zhu and M. Mujahid, Development of Nanocrystalline Fe-Co Alloys Using Mechanical Alloying, Materials Science & Technology, vol. 21 (8), 2005, pp 925-933.

  • S. Sarfraz, B. Naseem, S. Amin and M. Mujahid, Synthesis and Characterization of Nano Hydroxyapatite, Advanced Materials Research, vol. 264-265, 2011, pp1370-1375. doi:10.4028/www.scientific.net/AMR.264-265.1370

  • S. Amin, T. Siddique, M. Mujahid, S.S. Shah and A.D. Anjum, Synthesis of Nano Hydroxyapatite Ceramic Powders Using Different Surfactant Templates and Their Characterization, The Nucleus, vol. 48 (1) 2011, pp 35-40.

  • Q.H. Shah, M. Mujahid, M. Al-Atabi, Y.A. Abakr, Load Carrying Capability of Liquid Filled Cylindrical Shell Structures under Axial Compression; J. Eng. Sci. Tech (JESTEC), vol. 6 (4) 2011, pp 516-529.

  • S. Salam, M. Islam, M. Alam, A. Akram, M. Ikram, A. Mahmood, M. Khan and M. Mujahid, Adv. Nat. Sci.: Nanosci. Nanotechnol. Vol. 2 (4) 2011, p045001. doi:10.1088/2043-6262/2/4/045001.

  • M. Aftab Akram, R. Hussain, M. Mujahid, S. Javed, H. Javed, N. Iqbal; A Convenient Synthesis Route of Hydroxyapatite from Egg Shells, NUST Journal of Engineering Sciences (NJES), vol. 4 (1) 2011, pp 17-20.

  • M. Abdullah, J. Ahmad, M. Mehmood, H. Waqas and M. Mujahid, Effect of deflocculants on hardness and densification of YSZ–Al2O3 (whiskers & particulates) composites, Composites: Part B 43 (3) 2012, 1564-1569.  doi:10.1016/j.compositesb.2011.08.015

  • M. Khalid, M. Mujahid, Aamer Nusair Khan, R.S. Rawat, I. Salam, K. Mehmood, Plasma Sprayed Alumina Coating on Ti6Al4V Alloy for Orthopaedic Implants: Microstructure and Phase Analysis, Key Engineering Materials, vol. 510-511 (2012), p547. doi:10.4028/www.scientific.net/KEM.510-511.547

  • M. Bilal, R.M. Gul, M. Mujahid, Z. Askar, Comparative Performance of Locally Made and the Foreign Made Dynamic Compression Plates, Key Engineering Materials, vol. 510-511 2012, pp 569-576. doi:10.4028/www.scientific.net/KEM.510-511.569

  • S. Javed, M. Mujahid, M. Islam, and U. Manzoor, Morphological Effects of Reflux Condensation on Nanocrystalline Anatase Gel and Thin Films, Mat. Chem. Phys. 132 (2012) 509-514. (Elsevier, IF: 2.234) doi:10.1016/j.matchemphys.2011.11.062. 

  • M. Abdullah, J. Ahmad, M. Mehmood, M. Mujahid, Effect of CTAB Addition on Improvement of Properties of Al2O3(w)–Al2O3(n)–ZrO2(n) (3mole% Yttria Stabilized Tetragonal Zirconia) Nanocomposite, IJIET 2012 Vol.2(5): 543-546. DOI: 10.7763/IJIET.2012.V2.201

  • M. Khalid, M. Mujahid, S. Amin, R.S. Rawat, A. Nusair, G.R. Deen, Effect of surfactant and heat treatment on morphology, surface area and crystallinity in hydroxyapatite nano crystals, Ceramics International, vol. 39 (1) 2013, pp 39-50. http://dx.doi.org/10.1016/j.ceramint.2012.05.090  

  • M. Khalid, M. Mujahid, A. N. Khan, R. S. Rawat, K. Mehmood, Effect of Arc Current on Phase Evolution, Texturing and Wear Behavior of Plasma Sprayed CaZrO3 Coatings, Ceramics International, vol. 39 (3) 2013, 2293-2302. http://dx.doi.org/10.1016/j.ceramint.2012.08.076

  • M. Khalid, M. Mujahid, A. N. Khan, R. S. Rawat, Dip Coating of Nano Hydroxyapatite on Titanium Alloy with Plasma Assisted γ-Alumina Buffer Layer: A Novel Coating Approach, Journal of Materials Science & Technology, vol. 29(6) 2013, 557-564. http://dx.doi.org/10.1016/j.jmst.2013.02.003  

  • K.M. Zia, N.A. Qureshi, M. Mujahid, K. Mahmood, M. Zuber, Chitin based polyurethanes using hydroxyl terminated polybutadiene, Part II: Morphological studies, International Journal of Biological Macromolecules, vol. 59 (2013) 313-319. (Elsevier, IF: 2.596) http://dx.doi.org/10.1016/j.ijbiomac.2013.04.042 

  • Fozia T. Minhas, Shahabuddin Memon, Imdadullah Qureshi, M. Mujahid, M. I. Bhanger, Facilitated Kinetic Transport of Cu(II) Through a Supported Liquid Membrane with Calix[4]arene as Carrier, Comptes Rendus - Chimie, vol. 16 (8) 2013, pp. 742-751. (Elsevier, IF: 1.92) http://dx.doi.org/10.1016/j.crci.2013.02.004 

  • Fozia T. Minhas, Shahabuddin Memon, M. I. Bhanger, Nadeem Iqbal, M. Mujahid; Solvent Resistant Thin Film Composite Nanofiltration Membrane: Characterization and Permeation Study, Applied Surface Science, vol. 282 (2013) 887-897. (Elsevier, IF: 2.112) http://dx.doi.org/10.1016/j.apsusc.2013.06.077 

  • Farrukh, Sarah; Minhas, Fozia; Hussain, Arshad; Bhanger, M.; Mujahid, M.; Preparation, Characterization and Applicability of Novel Calix[4]arene Based Cellulose Acetate Membrane in Gas Permeation, J. Appl. Polym. Sci., vol. 131 (6) 2014. doi: 10.1002/app.39985  (Wiley, IF: 1.289)

  • K.M. Zia, S. Anjum, M. Zuber, M. Mujahid, T. Jamil; Synthesis and molecular characterization of chitosan based polyurethane elastomers using aromatic diisocyanate, International Journal of Biological Macromolecules, vol. 66, 2014, 26-32. http://dx.doi.org/10.1016/j.ijbiomac.2014.01.073 (Elsevier, IF: 2.596)

  • Haroon Mahmood, Amir Habib, Mohammad Mujahid, Muhammad Tanveer, Sofia Javed, Asif Jamil; Band Gap Reduction of Titania Thin films using Graphene Nanosheets, Materials Science in Semiconductor Processing, 24 (2014) 193-199. http://dx.doi.org/10.1016/j.mssp.2014.03.038  (Elsevier IF: 1.761)

  • Sarah Farrukh, Sofia Javed, Arshad Hussain, Mohammad Mujahid; Blending of TiO2 nanoparticles with Cellulose Acetate Polymer: To Study the Effect on Morphology and Gas Permeation of Blended Membranes, Asia-Pacific Journal of Chemical Engineering, vol. 9 (4), 2014, pp 543-551. DOI: 10.1002/apj.1783 (Wiley, IF: 0.797)

  • Khurram Iqbal, Jianjun Sha, Zhen-Kun Lei, Asghari Maqsood, Mohammad Mujahid; Numerical studies of infiltration dynamics of liquid- copper and silicon/solid- carbon system, JOM vol. 66 (6) June 2014, pp 953-959. DOI: 10.1007/s11837-014-0951-x (Springer, IF: 1.401)

  • M Shah, M Ali, A Sultan, M Mujahid, H Mehmood, NU Dar, M Shuaib; An Investigation into the Fatigue Crack Growth Rate of Electron Beam-Welded H13 Tool Steel: Effect of Welding and Post-Weld Heat Treatment, Metallography, Microstructure, and Analysis 3 (2) April 2014, pp 114-125. (Springer) DOI: 10.1007/s13632-014-0128-6 

  • Mahboob Alam, M. Islam, Amine Achour, Ansar Hayat, Bilal Ahsan, Haroon Rasheed, Shahzad Salam, M. Mujahid; Solution Processing of Cadmium Sulfide Buffer Layer and Aluminum-Doped Zinc Oxide Window Layer for Thin Films Solar Cells, Surface Review and Letters, vol. 21 (4) 2014, 1450059. (World Scientific Publishing Company, IF: 0.28) DOI: 10.1142/S0218625X14500590 

  • Sofia Javed, Muhammad Aftab Akram, Mohammad Mujahid; Environment friendly template free microwave synthesis of sub-micron sized hierarchical titania nanostructures and their application in photovoltaics, CrystEngComm, 16 (2014) 10937. (RSC, IF: 4.034) DOI: 10.1039/C4CE01826E

  • K. Iqbal, J.J. Sha, A. Maqsood, M. Mujahid, M.H. Asghar; Design Optimization of Si Optical Window for 4.2 μm Wavelength, Applied Physics A, vol. 118 (3), 2015, pp923-929. (Springer IF: 1.694) DOI 10.1007/s00339-014-8813-5  

  • Shahid Ameer, Iftikhar Hussain Gul, Nasir Mahmood, Muhammad Mujahid; Semiconductor-to-Metallic Flipping in a ZnFe2O4 - graphene based Smart Nano System: Temperature/Microwave Magneto-Dielectric Spectroscopy, Materials Characterization, vol. 99, 2015, pp 254–265. (Elsevier, IF: 1.925) doi:10.1016/j.matchar.2014.11.018  

  • U. Manzoor, F. T. Zahra, Sidra Rafique, M. T. Moin, M. Mujahid, Effect of Synthesis Temperature, Nucleation Time and Post Synthesis Heat Treatment of ZnO Nanoparticles and Its Sensing Properties, Journal of Nanomaterials, vol. 5 (2015), article ID 189058. (Hindawi, IF: 1.611) http://dx.doi.org/10.1155/2015/189058  

  • Shahid Amin, Tahira Siddique, Mohammad Mujahid, Syed Sakhawat Shah, Synthesis and Characterization of Nano Hydroxyapatite using Reverse Micro Emulsions as Nano Reactors, J. Chem. Soc. Pak., vol. 37(1), 2015, pp 79-85. (CSP, IF: 0.612)

  • Fozia Tabassum Minhas, Sarah Farrukh, Arshad Hussain, M. Mujahid, Comparison of silica and novel functionalized silica based cellulose acetate hybrid membranes in gas permeation study, Journal of Polymer Research, (2015) 22:63. (Springer IF: 1.897) 10.1007/s10965-015-0701-y 

  • Shahid Ameer, Iftikhar Hussain Gul, Nasir Mahmood, Muhammad Mujahid; Synthesis, characterization and optical properties of in situ ZnFe2O4 functionalized rGO nano hybrids through modified solvothermal approach, Optical Materials, 45 (2015) 69-75. (Elsevier, IF: 2.075) doi:10.1016/j.optmat.2015.02.035 

  • Shane Fatima, Mushtaq Khan, S. H. Imran Jaffery, Liaqat Ali, Mohammad Mujahid, Shahid Butt; Optimization of Process Parameters for Plasma Arc Welding (PAW) of Austenitic Stainless Steel (304L) with Low Carbon Steel(A-36), Journal of Materials: Design and Applications, 0(0) 2015, pp 1-14. Available online 29 Apr 2015 (SAGE Publications, IF: 0.746).

  • Shahid Ameer, Iftikhar H. Gul, Muhammad Mujahid; Ultra Low Permittivity/Loss CoFe2O4 and CoFe2O4 -rGO Nanohybrids by Novel 1-hexanol Assisted Solvothermal Process, Journal of Alloys and Compounds, vol.642 (2015) 78-82. (Elsevier IF: 2.726). doi:10.1016/j.jallcom.2015.04.101 

  • Muhammad Aftab Akram, Sofia Javed, Jun Xu, Mohammad Mujahid, Chun Sing Lee; Arrays of ZnO/CuInxGa1-xSe2 nanocables with tunable shell composition for efficient photovoltaics, Journal of Applied Physics, vol. 117(20), 205306 (2015). (AIP, IF: 2.185) http://dx.doi.org/10.1063/1.4921825

  • Muhammad Aftab Akram, Sofia Javed and Mohammad Mujahid; Synthesis and Surface Modification of ZnO Nanorods Arrays, Advanced Materials Research, vol. 1119 (2015) pp 49-53 (Trans Tech Publications) http://dx.doi.org/10.4028/www.scientific.net/amr.1119.49 

  • Sofia Javed, Muhammad Aftab Akram and Mohammad Mujahid; Instant Microwave Synthesis of Titania Nanoflowers for Application in DSSCs, Advanced Materials Research, vol. 1119 (2015) pp 14-18 (Trans Tech Publications) doi:10.4028/www.scientific.net/AMR.1119.14 

  • M. Mujahid, S. Sarfraz, S. Amin, On the Formation of Hydroxyapatite Nano Crystals Prepared Using Cationic Surfactant, Materials Research (Ibero-American Journal of Materials), vol. 18 (3) 2015, pp 468-472. (Taylor & Francis 2014, IF:0.793) doi: http://dx.doi.org/10.1590/1516-1439.298014 

  • Khurram Iqbal, Sha Jian-Jun, Asghari Maqsood, M. Mujahid; Influence of carbonization on structural and mechanical properties of PAN/phenolic-based carbon/carbon composites, Journal of Dalian University of Technology, vol. 55 (3) 2015, pp 261-265. http://www.cnki.net/kcms/detail/21.1117.N.20150525.1216.012.html

  • Sarah Farrukh, Fozia T. Minhas, Arshad Hussain, M. Mujahid, Fabrication, Characterization and CO2/N2 Gas Permeance Study of Novel Blended Membrane, Int. J. of Global Warming, vol. 7 (4) 2015, pp 532-547. (Inderscience Publishers, IF: 0.77) DOI:10.1504/IJGW.2015.070049

  • Sarish Rehman, Kishwar Khan, Mohammad Mujahid, Shaneela Nosheen; Synthesis of Nano hydroxyapatite and its rapid mediated surface functionalization by silane coupling agent, Materials Science and Engineering: C, vol. 58 (1 Jan 2016) pp 675-681 (Elsevier, IF: 3.088) doi:10.1016/j.msec.2015.09.014 

  • Amna Safdar, Mohammad Islam, Iftikhar Ahmad, Aftab Akram, Mohammad Mujahid, Yasir Khalid, Yanqiu Zhu; Quantum Confinement and Size Effects in Cu2ZnSnS4 Thin Films Produced Using Solution Processed Ultrafine Nanoparticles, Materials Science in Semiconductor Processing, vol. 41 (Jan 2016) pp 420-427 (Elsevier, IF: 1.955) doi:10.1016/j.mssp.2015.09.027

  • M. Aftab Akram, Sofia Javed, M. Islam, M. Mujahid, Amna Safdar;  Arrays of CZTS Sensitized ZnO/ZnS and ZnO/ZnSe core/shell Nanorods for Liquid Junction Nanowire Solar Cells, Solar Energy Materials and Solar Cells, vol. 146 (March 2016) 121-128. (Elsevier IF: 5.337) doi:10.1016/j.solmat.2015.11.034

  • Farha Masood, Tariq Yasin, Habib Bukhari, Muhammad Mujahid; Characterization and application of roxithromycin loaded cyclodextrin based nanoparticles for treatment of multidrug resistant bacteria, Materials Science and Engineering: C, vol. 61 (1 Apr 2016) pp 1-7. (Elsevier, IF: 3.088) doi:10.1016/j.msec.2015.11.076 

  • Amna Safdar, Mohammad Islam, Muhammad Aftab Akram, Mohammad Mujahid, Yasir Khalid, S. Ismat Shah, Reaction Time and Film Thickness Effects on Phase Formation and Optical Properties of Solution Processed Cu2ZnSnS4 Thin Films, Journal of Materials Engineering and Performance, 25 (2) 2016, pp 1-9. (Springer, IF: 1.0)  doi: 10.1007/s11665-015-1874-6   

  • Aqdas Noreen, Khalid Mahmood Zia, Mohammad Zuber, Muhammad Ali, Mohammad Mujahid, A critical review of algal biomass: A versatile platform of bio-based polyesters from renewable resources, International Journal of Biological Macromolecules, 86 (2016) 937-949. (Elsevier, IF: 3.138)  doi:10.1016/j.ijbiomac.2016.01.067   

  • Mirza Shirjeel Alam, Umair Manzoor, Mohammad Mujahid and Arshad Saleem Bhatti, Highly Responsive UV Sensors and Tunable Optical Bandgaps of Mg-Doped ZnO Nanoparticles, Journal of Sensors, Vol. 2016 (2016), Article ID 8296936, (Hindawi, IF: 1.182) http://dx.doi.org/10.1155/2016/8296936 

  • Muhammad Imran Ahmed, Zakir Hussain, Mohammad Mujahid, Ahmed Nawaz Khan, Syed Saad Javaid, Amir Habib, Low Resistivity ZnO-GO Electron Transport Layer Based CH3NH3PbI3 Solar Cells, AIP Advances, 6, 065303 (2016); (AIP Publishing, IF: 1.59) http://dx.doi.org/10.1063/1.4953397 

  • Khalid Mahmood Zia, Aqdas Noreen, Mohammad Zuber, Shazia Tabasum, Mohammad Mujahid, Recent devel-opments and future prospects on bio-based polyesters derived from renewable resources: A review, International Journal of Biological Macromolecules, 82 (2016) 1028-1040. (Elsevier, IF: 3.138) http://dx.doi.org/10.1016/j.ijbiomac.2015.10.040 

  • Tayyaba Ghani, Zeeshan Ali, M. Mujahid, Mazhar Mahmood, Synthesis of Titanium Oxide nanotubes by Ano-dization Method, International Journal of Energy Applications and Technology, vol. 3(1) 2016, 14-20. (AcademicPaper, Turkey, www.academicpaper.org/index.php/IJEAT )

  • M. A. Hassan, M. Mujahid, L. H. Wong, Multi Band Gap Cu(In,Ga)(S,Se)2 Thin Films Deposited by Spray Pyroly-sis for High Performance Solar Cell Devices, Materials Science Forum, Vol. 864 (2016)  pp. 143-148. 10.4028/www.scientific.net/MSF.864.143  

BOOKS / BOOK CHAPTERS​

  • Amin, S. and Mujahid, M. (2011) Synthesis of Nano Hydroxyapatite by Chemical Precipitation Using Different Surfactant Templates, in Biomaterials Science - Processing, Properties, and Applications, Volume 228, Chapter 7 (eds R. Narayan, A. Bandyopadhyay and S. Bose), John Wiley & Sons, Inc., Hoboken, NJ, USA. (Print ISBN: 9781118060018, Online ISBN: 9781118144565) doi: 10.1002/9781118144565.ch7

  • Sarish Rehman, Mohammad Mujahid, Kishwar Khan; Biocompatibility Study of Hydroxyapatite, Lambert Academic Publications (2014) Germany. (ISBN# 978-3-659-51215-5)

INTERNATIONAL CONFERENCES​




  • M. Mujahid, A. K. Lis, C.I. Garcia and A. J. DeArdo: in Proc. Int. Conf. on Processing, Microstructure, and Properties of Microalloyed and Other Modern High Strength Low Alloy Steels, June 3-6, 1991, Pittsburgh, USA, ed. by DeArdo, A. J., (The Iron & Steel Society, Inc., Warrendale, PA, 1992), pp 345-356.

  • M. Mujahid, P. J. Evens and J. W. Martin: Proceedings 2nd International Symposium on Advanced Materials, Sep. 15-19, 1991, Islamabad, eds. A. Haq, N. Ahmad and A. Q. Khan, (Dr. A. Q. Khan Research Laboratories, Kahuta, Pakistan, 1992), pp 75-83.

  • Tekin, M. Mujahid, J. W. Martin, S. W. K. Shaw, G. M. McColvin and I. C. Elliott: in Conference Proceedings of Superalloys 1992, eds. S. D. Antolovich, R. W. Stusrud, R. A. Mackay, D. L. Anton, T. Khan, R. D. Kissinger, D. L. Klarstrom, (TMS, Warrendale, PA, USA, 1992), pp 457-466.

  • K. Lis, M. Mujahid, C. I. Garcia and A. J. DeArdo: in Gilbert R. Speich Symposium Proceedings on Fundamentals of Aging and Tempering in Bainitic and Martensitic Steel Products, October 25-28, 1992, Montreal, CANADA, eds. G. Krauss and P. E. Repas, (The Iron & Steel Society, Inc., Warrendale, PA, 1992), pp 129-138.

  • K. Lis, M. Mujahid, C. I. Garcia and A. J. DeArdo: in Proceedings Eighth Conference on Electron Microscopy of Solid Materials (MECS'93), Wroclaw-Szklarska Poreba, POLAND, 1993, p. 309.

  • M. Mujahid and J.W. Martin: Proceedings 3rd Int’l Symposium on Advanced Materials, September 20-24, 1993, Islamabad, Pakistan, pp 363-374.

  • M. I. Qureshi, M. Ilyas, F. A. Khalid and M. Mujahid: Rapidly Solidified Dental Amalgam Alloys, proceedings of the 2nd Pacific Rim International Conference on Advanced Materials and Processing at Kyongju, KOREA, The Korean Institute of Metals and Materials (1995), pp 1827-1832.

  • M. I. Qureshi, F. A Khalid and M. Mujahid: High Strain Rate Deformation in Copper Based Shape Memory Alloy, proceedings of the 2nd Pacific Rim International Conference on Advanced Materials and Processing at Kyongju, KOREA, The Korean Institute of Metals and Materials (1995), pp 1673-1677.

  • C.I. Garcia, M. Mujahid and A.J. DeArdo: The Effect of Carbon Content on the Structure-Property of HSLA-100 Steels, proceedings of International Symposium on High Performance Steels for Structural Applications (ASM Materials Week, Oct 30-Nov 1 1995, Cleveland, OH, USA), ASM International, pp 135-140.

  • M.I. Qureshi, M. Ilyas, W. Ahmad, F.A. Khalid and M. Mujahid: Microstructural Study of Dental Amalgam Alloys Produced by Rapid Solidification, Proceedings 4th Int’l Symposium on Advanced Materials (September 17-21, 1995, Islamabad, Pakistan.

  • M. Mujahid and M. I. Qureshi: On the carbide formation in a high-carbon stainless steel, Proceedings First International Conference on Phase Transformations, Islamabad, Pakistan, 1996, pp 119-125.

  • M. S. Salim, M. I. Qureshi and M. Mujahid, Development of Particle-Reinforced Metal-Matrix Composites (MMC) Using Liquid Metallurgy Technique, proceedings 5th Int’l Symposium on Advanced Materials, Sep. 21-25, 1997, Islamabad.

  • M. Ali, M. I. Qureshi and M. Mujahid, Phase Transformation Studies of a High Carbon High Chromium Stainless Steel, Proceedings 5th Int’l Symposium on Advanced Materials, Sep. 21-25, 1997, Islamabad.

  • U. Manzoor, M. I. Qureshi and M. Mujahid, Development and Evaluation of Lead-Free Solder Alloys, Proceedings 5th Int’l Symposium on Advanced Materials, Sep. 21-25, 1997, Islamabad.

  • L. Zhou, N. Hussain and M. Mujahid, High Temperature Corrosion Behavior Of ODS Superalloy, Proceedings 5th Int’l Symposium on Advanced Materials, Sep. 21-25, 1997, Islamabad.

  • Z. Iqbal, A. Rauf, A. Ali, M. Mujahid, A. ul Haq and A. Q. Khan, Effect Of Process Parameters On The Characteristics Of Ti2N Coatings, Proceedings 5th Int’l Symposium on Advanced Materials, Sep. 21-25, 1997, Islamabad.

  • M. Mujahid, M. I. Qureshi and M. Ali: Influence of Heat Treatment on the Microstructure of a C-Cr-Mo Stainless Steel, (INVITED PAPER) proceedings Third Pacific Rim International Conference on Advanced Materials and Processing (PRICM-3), July 12-16, 1998, Honolulu, Hawaii, USA, pp 41-48.

  • M. I. Qureshi and M. Mujahid: Development of MMC using liquid metallurgy technique: Control of Porosity and Particulates distribution, proceedings Third Pacific Rim International Conference on Advanced Materials and Processing (PRICM-3), July 12-16, 1998, Honolulu, Hawaii, USA, pp 327-332.

  • M. I. Qureshi, M. Mujahid and Iyaz-ul-Haq: Effect of Processing Variables on the Distribution of SiC Particulates in an Aluminium Alloy Matrix Composite, proceedings 6th Annual Int’l Conf. Composite Engineering, (ICCE/6, Orlando, FL, USA, June 27-July 3, 1999), ed. D. Hui, p679.

  • Kh. S. Karimov, M. M. Ahmed, R. M. Gul, M. Mujahid, Kh. M. Akhmedov and J. Valiev: Diode Effect in Two-Layer Organic Semiconductors Structure Deposited from Solution at High Gravity, proceedings 7th Int’l Symposium on Advanced Materials (ISAM-2001), Sep. 17-21, 2001, Islamabad, pp 329-333.

  • M. Mujahid and J. Zhu, Synthesis and Characterization of Fe-Co Nanocrystalline Alloys, MRS Spring Meeting (April 12-15, 2004, San Francisco, USA), MRS Proceedings, vol. 821 (2004), Cambridge University Press, P8.26. http://dx.doi.org/10.1557/PROC-821-P8.26

  • K. Then, M. Mujahid and B. Zhang, Effect of Processing on the Structure and Wear Properties of Sputtered Zirconium Oxide Thin Films, proceedings (CD format) International Conference Thin Films 2004 (13-17 July 2004, SINGAPORE), 34-CTF-A824.

  • S. Sarfraz, B. Naseem, S. Amin, M. Mujahid and B. Mateen, Synthesis and Characterization of Hydroxyapatite Nano-Powders Using Surfactants as Templates, 6th International Bhurban Conference on Applied Sciences & Technology (Jan. 19-22, 2009, Islamabad).

  • M. Khalid, R. S. Rawat, C. Zhong, M.  Mujahid, A. Nusair, K. Mahmood, G. Macharaga, G. Roshan Deen, P. Lee, A. Tan and S. V. Springham, Effect of gun current on deposition of CaZrO3 coatings on SS316L by air plasma spraying for biomedical applications, 5th International Conference on the Frontiers of Plasma Physics and Technology, April 18-22, 2011, Singapore.

  • M. Abdullah, J. Ahmad, M. Mehmood, M. Mujahid, Effect of CTAB on improvement of properties of Al2O3(w)-Al2O3(n)-ZrO2(n) (3mole Yttria stabilized zirconia) Nanocomposite, in proceedings of the International Conference on Knowledge and Education Technology, 10-12 June 2011, Chengdu, China.

  • M. Khalid, M. Mujahid, A. Nusair, R.S. Rawat, M. Farooque, Surface engineering of metallic alloys for biomedical applications, International Symposium on Advanced Materials - 2011, Sep. 26-30, 2011, Islamabad, Pakistan.

  • K. Iqbal, A. Maqsood, M. Mujahid, M.H. Asghar, Characterization and preparation of anti-reflection coatings in the range of 3-5 μm for Si optical window, Characterization of Minerals, Metals, and Materials - TMS 2012 Annual Meeting (11-15 March 2012 Orlando FL, USA), Code89573, pp 327-337.

  • S. Javed, M. Mujahid, M. Islam, and M. A. Akram, (2013) Precursor Modification and Refluxing Effects on Titania Nanostructures Prepared via Sol Gel Reflux Synthesis, in TMS2013 Supplemental Proceedings (ed TMS), John Wiley & Sons, Inc., Hoboken, NJ, USA, 2013, pp 127-134. doi: 10.1002/9781118663547.ch17

  • S. Nosheen, S. Fatima, M. Mujahid, A. Hussain, A. Habib, A.Q. Malik; Synthesis of GIS Type Nano-Crystalline Zeolite, proceedings IBCAST, Jan 2013, Islamabad, (Advanced Materials Research, ttp).

  • Sarah Hafeez, Arshad Hussain, M. Mujahid; Pursuance Of Functionalized Titania Nano Particles On Morphology And Gas Permeation Of Stand Alone Cellulose Acetate Membrane, IUPAC 44th World Chemistry Congress 2013, 11-16 Aug 2013, Istanbul, Turkey.

  • Sarah Farrukh, Arshad Hussain, Sofia Javed, Mohammad Mujahid; Pursuance of Functionalized TiO2 Nanoparticles on Morphology and Gas Permeation of Cellulose Acetate Membrane, IUPAC 44th World Chemistry Congress 2013, 11-16 Aug 2013, Istanbul, Turkey.

  • S. Rehman, I. Calgeris, M. Mujahid, E. T. Oner; Synthesis and Characterization of Bio-Compatible Ferromagnetic Hydroxyapatite Composite, International Conference on Nanoscale Magnetism (ICNM-2013), September 02– 06, 2013, Istanbul, Turkey.

  • Shaneela Nosheen, Sundus Fatima, M. Mujahid, Nano sized DAC zeolite for environmental protection applications, 246th ACS National Meeting, 8-12 Sep. 2013, Indianapolis, IN, USA.

  • M Aftab Akram, Sofia Javed and Mohammad Mujahid; Synthesis and Surface Modification of ZnO Nanorods Arrays, proceedings 3rd International Conference on Nano and Materials Engineering (ICNME 2015), 2-3 April 2015, Phuket, Thailand.

  • Tayyaba Ghani, Zeeshan Ali, M. Mujahid, Mazhar Mahmood; Synthesis of Titanium Oxide nanotubes by Anodization Method, presented at International Conference on Advanced Technology and Sciences (ICAT15), 4-7 Aug 2015, Antalya, Turkey.

  • M. Aftab Akram, Sofia Javed, M. Mujahid; Solution Processed CIGS Nanowire Solar Cells based on ZnO/ZnSe/CIGSe Core/Shell/Shell Nanostructures, 2015 E-MRS Fall Meeting, 15-18 September 2015, Warsaw, Poland.

  • Muhammad Aamir Hassan, M. Mujahid, Multi band gap Cu(In,Ga)(S,Se)2 thin films deposited by spray pyrolysis for high performance solar cell devices, ICNME 2016, April 2016, Bali, Indonesia.


RESEARCH/TECHNICAL REPORTS​


  • J. W. Martin, M. Mujahid and A. W. Godfrey: COST-501 – Round II, Work Package 1, Progress Report (Sep. 1992- Feb. 1993), Project No. UK7 (ODS and PM), University of Oxford, UK.

  • J. W. Martin, M. Mujahid and A. W. Godfrey: COST-501 – Round II, Work Package 1, Final Report (Sep. 1993), Project No. UK7 (ODS and PM) University of Oxford, UK.

  • M. I. Qureshi and M. Mujahid: Failure Analysis of a 16 inch Ruptured Gas Pipeline, Final Report (March 2000), Sui Northern Gas Pipelines Ltd., Pakistan.

  • M. Mujahid: Nanostructured Magnetic Materials, Final Report (Dec. 2004), Project No. SUG 31/02, Nanyang Technological University, Singapore.

  • M. Mujahid: Synthesis of Nano Hydroxyapatite and its Product Development for Biomedical Applications, Progress Report (2012), Project No. 20-1564, Higher Education Commission (HEC), Islamabad.

​​Course Code ​Course Name ​MSE811 ​Materials Thermodynamics ​MSE821 ​Mechanical Behavior of Materials ​MSE101 ​Fundamentals of Engineering Materials ​MSE901 ​Advanced Characterization Techniques ​MSE952 ​Materials for Biomedical Applications ​MSE812 ​Phase Transformation & Micro Structures