Skip Ribbon Commands
Skip to main content
 
Research Publications 2017
 
[1] A. R. Abid, B. Marciniak, T. Pędziński, and M. Shahid, "Photo-stability and photo-sensitizing characterization of selected sunscreens’ ingredients," Journal of Photochemistry and Photobiology A: Chemistry, vol. 332, pp. 241-250, 2017.

[2] I. Ahmad, F. Derkink, P. Bampoulis, T. Boulogne, H. J. Zandvliet, R. Jan, et al., "Step-edge Induced Orientation of Nanorods in Evaporative Self-assembly on HOPG," Colloids and Interface Science Communications, vol. 19, pp. 25-30, 2017.

[3] N. Ahmad, G. Wang, J. Nelayah, C. Ricolleau, and D. Alloyeau, "Exploring the Formation of Symmetric Gold Nanostars by Liquid-Cell Transmission Electron Microscopy," Nano letters, vol. 17, pp. 4194-4201, 2017.

[4] N. AHMAD, G. WANG, J. NELAYAH, C. RICOLLEAU, and D. ALLOYEAU, "Driving reversible redox reactions at solid–liquid interfaces with the electron beam of a transmission electron microscope," Journal of Microscopy, 2017.

[5] W. Ahmad, T. Noor, and M. Zeeshan, "Effect of synthesis route on catalytic properties and performance of Co 3 O 4/TiO 2 for carbon monoxide and hydrocarbon oxidation under real engine operating conditions," Catalysis Communications, vol. 89, pp. 19-24, 2017.

[6] M. Ahmed and A. Q. Malik, "A Review of Works on Shaped Charges," Engineering, Technology & Applied Science Research, vol. 7, pp. 2098-2103, 2017.

[7] M. F. Ahmed, A. Hussain, and A. Q. Malik, "Synthesis and Characterization of Commercial Grade Energetic Materials using Decanted 2, 4, 6 Tri-nitrotoluene (TNT)," Journal of the Chemical Society of Pakistan, vol. 39, pp. 552-552, 2017.

[8] M. Ahsan and A. Hussain, "Computational Fluid Dynamics (CFD) Simulation and Comparison for Different Numbers of Baffles to Reduce Concentration Polarization Effects in Membrane Tubes," Journal of Engineering and Technological Sciences, vol. 49, pp. 114-131, 2017.

[9] M. Ahsan and A. Hussain, "A computational fluid dynamics (CFD) approach for the modeling of flux in a polymeric membrane using finite volume method," Mechanics & Industry, vol. 18, p. 406, 2017.

[10] M. Ahsan, O. M. Sweeney, and A. Hussain, "Development of user-defined extension for the simulation of membrane process in ASPEN HYSYS," Sigma: Journal of Engineering & Natural Sciences/Mühendislik ve Fen Bilimleri Dergisi, vol. 35, 2017.

[11] Q. U. Ain, A. N. Khan, M. Nabavinia, and M. Mujahid, "Enhanced mechanical properties and biocompatibility of novel hydroxyapatite/TOPAS hybrid composite for bone tissue engineering applications," Materials Science and Engineering: C, vol. 75, pp. 807-815, 2017.

[12] H. M. Ansari, Z. Niu, C. Ge, S. A. Dregia, and S. A. Akbar, "Spontaneous Rippling and Subsequent Polymer Molding on Yttria-Stabilized Zirconia (110) Surfaces," ACS nano, vol. 11, pp. 2257-2265, 2017.

[13] M. Arshad, A. Maqsood, I. Gul, and M. Anis-Ur-Rehman, "Fabrication, electrical and dielectric characterization of Cd-Ni nanoferrites," Materials Research Bulletin, vol. 87, pp. 177-185, 2017.

[14] M. Arslan, A. Habib, M. Zakria, A. Mehmood, and G. Husnain, "Elemental, structural and optical properties of nanocrystalline Zn 1− x Cu x Se films deposited by close spaced sublimation technique," Journal of Science: Advanced Materials and Devices, vol. 2, pp. 79-85, 2017.

[15] A. Bakhsh, I. H. Gul, A. Maqsood, S. H. Wu, C. H. Chan, and Y. C. Chang, "Effect of High Substrate Temperature on Morphology, Structural and Optical Properties of CdZnS Nanostructures," in Materials Science Forum, 2017, pp. 24-31.

[16] S. Farrukh, X. Fan, and A. Hussain, "Comparative CO2 Adsorption Analysis in Pure and Amine-Modified Composite Membranes," Polymer-Plastics Technology and Engineering, pp. 1-9, 2017.

[17] H. Ghaedi, M. Ayoub, S. Sufian, S. M. Hailegiorgis, G. Murshid, S. Farrukh, et al., "Experimental and prediction of volumetric properties of aqueous solution of (allyltriphenylPhosphonium bromide—Triethylene glycol) deep eutectic solvents," Thermochimica Acta, vol. 657, pp. 123-133, 2017.

[18] H. Ghaedi, M. Ayoub, S. Sufian, G. Murshid, S. Farrukh, and A. M. Shariff, "Investigation of various process parameters on the solubility of carbon dioxide in phosphonium-based deep eutectic solvents and their aqueous mixtures: Experimental and modeling," International Journal of Greenhouse Gas Control, vol. 66, pp. 147-158, 2017.

[19] M. Haneef, H. Saleem, and A. Habib, "Use of graphene nanosheets and barium titanate as fillers in PMMA for dielectric applications," Synthetic Metals, vol. 223, pp. 101-106, 2017.

[20] A. Hassan, M. B. K. Niazi, A. Hussain, S. Farrukh, and T. Ahmad, "Development of Anti-bacterial PVA/Starch Based Hydrogel Membrane for Wound Dressing," Journal of Polymers and the Environment, pp. 1-9, 2017.

[21] M. A. Hassan, M. Mujahid, S. W. Leow, L. WenJie, R. R. Prabhakar, and L. H. Wong, "Investigation of selenization and various CBD CdS deposition conditions to fabricate high performing spray pyrolysis synthesized Cu (In, Ga)(S, Se) 2 solar cells," Journal of Renewable and Sustainable Energy, vol. 9, p. 013504, 2017.

[22] A. Hayder, A. Hussain, A. N. Khan, and H. Waheed, "Fabrication and characterization of cellulose acetate/hydroxyapatite composite membranes for the solute separations in Hemodialysis," Polymer Bulletin, pp. 1-14, 2017.

[23] B. Hussain and M. Ahsan, "Numerical analysis of flash calculation using soave redlich-kwong equation of state with Matlab," SIGMA Journal of Engineering and Natural Sciences-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI, vol. 35, pp. 427-439, 2017.

[24] A. IBRAR, S. NAWAZISH, I. KHAN, T. NOOR, B. UZAIR, S. M. BUKHARI, et al., "TRIAZOLOTHIADIAZINES AS A NEW CLASS OF EFFICIENT DNA INTERCALATING AGENTS," anticancer drugs, vol. 6, p. 19, 2017.

[25] H. Ikram, F. A. Khalid, M. Akmal, and Z. Abbas, "Effect of Copper and Zirconium Addition on Properties of Fe-Co-Si-B-Nb Bulk Metallic Glasses," Journal of Materials Engineering and Performance, vol. 26, pp. 3144-3150, 2017.

[26] M. Israr-Qadir, S. Jamil-Rana, O. Nur, and M. Willander, "Zinc Oxide-Based Self-Powered Potentiometric Chemical Sensors for Biomolecules and Metal Ions," Sensors, vol. 17, p. 1645, 2017.

[27] R. Jan, A. Habib, M. A. Akram, I. Ahmad, A. Shah, M. Sadiq, et al., "Flexible, thin films of graphene–polymer composites for EMI shielding," Materials Research Express, vol. 4, p. 035605, 2017.

[28] R. Jan, A. Saboor, A. N. Khan, and I. Ahmad, "Estimating EMI shielding effectiveness of graphene-polymer composites at elevated temperatures," Materials Research Express, vol. 4, p. 085605, 2017.

[29] A. Jilani, M. H. D. Othman, M. O. Ansari, R. Kumar, A. Alshahrie, A. F. Ismail, et al., "Facile spectroscopic approach to obtain the optoelectronic properties of few-layered graphene oxide thin films and their role in photocatalysis," New Journal of Chemistry, vol. 41, pp. 14217-14227, 2017.

[30] M. Junaid, M. Baig, M. Shamir, F. Khan, K. Rehman, and J. Haider, "A comparative study of pulsed laser and pulsed TIG welding of Ti-5Al-2.5 Sn titanium alloy sheet," Journal of Materials Processing Technology, vol. 242, pp. 24-38, 2017.

[31] A. Khan, M. B. K. Niazi, S. R. Naqvi, and W. Farooq, "Influence of Plasticizers on Mechanical and Thermal Properties of Methyl Cellulose-Based Edible Films," Journal of Polymers and the Environment, pp. 1-10, 2017.

[32] B. Khan, M. B. K. Niazi, A. Hussain, and Z. Jahan, "Influence of carboxylic acids on mechanical properties of thermoplastic starch by spray drying," Fibers and Polymers, vol. 18, pp. 64-73, 2017.

[33] I. U. Khan, M. H. D. Othman, H. Hashim, T. Matsuura, A. Ismail, M. Rezaei-DashtArzhandi, et al., "Biogas as a renewable energy fuel–A review of biogas upgrading, utilisation and storage," Energy Conversion and Management, vol. 150, pp. 277-294, 2017.

[34] M. Khan, A. N. Khan, A. Saboor, and I. H. Gul, "Investigating mechanical, dielectric, and electromagnetic interference shielding properties of polymer blends and three component hybrid composites based on polyvinyl alcohol, polyaniline, and few layer graphene," Polymer Composites, 2017.

[35] M. A. Khan, F. Qazi, Z. Hussain, M. U. Idrees, S. Soomro, and S. Soomro, "Recent Trends in Electrochemical Detection of NH3, H2S and NOx Gases," INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, vol. 12, pp. 1711-1733, 2017.

[36] M. B. Khan, R. Jan, A. Habib, and A. N. Khan, "Evaluating Mechanical Properties of Few Layers MoS2 Nanosheets-Polymer Composites," Advances in Materials Science and Engineering, vol. 2017, 2017.

[37] M. N. A. Khan, A. Azam, and L. D. Kocinac, "Coincidence of multivalued mappings on metric spaces with a graph," Filomat, vol. 31, 2017.

[38] M. N. A. Khan, A. Azam, and N. Mehmood, "Coincidence Points of a Sequence of Multivalued Mappings in Metric Space with a Graph," Mathematics, vol. 5, p. 30, 2017.

[39] M. Z. Khan, I. H. Gul, H. Anwar, S. Ameer, A. N. Khan, A. A. Khurram, et al., "Massive dielectric properties enhancement of MWCNTs/CoFe 2 O 4 nanohybrid for super capacitor applications," Journal of Magnetism and Magnetic Materials, vol. 424, pp. 382-387, 2017.

[40] A. A. Khurram, A. Khan, I. H. Gul, and T. Subhani, "Glass Fiber Epoxy Matrix Composites Containing Zero and Two Dimensional Carbonaceous Nanoreinforcements," Polymer Composites, 2017.

[41] M. T. Masood, C. Weinberger, J. Sarfraz, E. Rosqvist, S. Sandén, O. J. Sandberg, et al., "Impact of film thickness of ultra-thin dip-coated compact TiO2 layers on the performance of mesoscopic perovskite solar cells," ACS Applied Materials & Interfaces, 2017.

[42] R. Mehek, N. Iqbal, T. Noor, H. Nasir, Y. Mehmood, and S. Ahmed, "Novel Co-MOF/Graphene Oxide Electrocatalyst for Methanol Oxidation," Electrochimica Acta, vol. 255, pp. 195-204, 2017.

[43] K. Muazim and Z. Hussain, "Graphene oxide—A platform towards theranostics," Materials Science and Engineering: C, 2017.

[44] J. Mustafa, I. Ahmad, M. Ahsan, and M. Kano, "Computational fluid dynamics based model development and exergy analysis of naphtha reforming reactors," International Journal of Exergy, vol. 24, pp. 344-363, 2017.

[45] M. Naqvi, J. Yan, E. Dahlquist, and S. R. Naqvi, "Off-grid electricity generation using mixed biomass compost: A scenario-based study with sensitivity analysis," Applied Energy, 2017.

[46] M. B. K. Niazi, Z. Jahan, S. S. Berg, and Ø. W. Gregersen, "Mechanical, thermal and swelling properties of phosphorylated nanocellulose fibrils/PVA nanocomposite membranes," Carbohydrate polymers, vol. 177, pp. 258-268, 2017.

[47] Z. Niu, H. M. Ansari, E. A. Chowdhury, S. A. Dregia, and S. A. Akbar, "Step faceting and the self-assembly of nanoislands on miscut YSZ (001) surfaces," Applied Surface Science, vol. 407, pp. 192-196, 2017.

[48] E. Pervaiz, H. Liu, and M. Yang, "Facile synthesis and enhanced photocatalytic activity of single-crystalline nanohybrids for the removal of organic pollutants," Nanotechnology, vol. 28, p. 105701, 2017.

[49] E. Pervaiz, M. S. A. Virk, Z. Bingxue, C. Yin, and M. Yang, "Nitrogen doped RGO–Co3O4 nanograin cookies: highly porous and robust catalyst for removing nitrophenol from waste water," Nanotechnology, vol. 28, p. 385703, 2017.

[50] S. Qudsia, M. I. Ahmed, Z. Hussain, and S. Soomro, "Chemical functionalization of graphene oxide and its electrochemical potential towards the reduction of triiodide," Journal of Materials Science: Materials in Electronics, vol. 28, pp. 6664-6672, 2017.

[51] M. Rabbani, L. Ali, M. Mumtaz, and I. H. Gul, "Infield superconducting properties of nano-sized Ag added Cu0. 5Tl0. 5Ba2Ca2Cu3O10− δ," Progress in Natural Science: Materials International, vol. 27, pp. 487-490, 2017.

[52] S. Rana, U. Nazar, J. Ali, Q. u. A. Ali, N. M. Ahmad, F. Sarwar, et al., "Improved antifouling potential of polyether sulfone polymeric membrane containing silver nanoparticles: self-cleaning membranes," Environmental technology, pp. 1-9, 2017.

[53] A. Rehman, A. Chughtai, A. Ijaz, and M. A. Butt, "Evaluation of Base for Catalytic Hydrodechlorination of 2, 4-Dichlorophenol in Cocurrent Downflow Contactor Reactor," Arabian Journal for Science and Engineering, vol. 42, pp. 1419-1425, 2017.

[54] A. Riaz, A. Usman, M. Faheem, Z. Hussain, A. N. Khan, and S. Soomro, "Effect of Polymerization of Aniline on Thermal Stability, Electrical Conductivity and Band Gap of Graphene Oxide/PolyanilineNanocomposites," Int. J. Electrochem. Sci, vol. 12, pp. 1785-1796, 2017.

[55] N. Riaz, M. Faheem, and A. Riaz, "Surfactant-modified silver nanoparticle ink for high-resolution ink-jet printed narrow-gaped organic electrodes," Materials Express, vol. 7, pp. 113-122, 2017.

[56] S. S. A. Shah and H. Nasir, "Liquid-Phase Exfoliation of Few-Layer Graphene and Effect of Sonication Time on Concentration of Produced Few Layer Graphene," in Nano Hybrids and Composites, 2017, pp. 17-24.

[57] A. Shaheryar, S. Khan, H. Qaiser, A. A. Khurram, and T. Subhani, "Mechanical and thermal properties of hybrid carbon fibre–phenolic matrix composites containing graphene nanoplatelets and graphite powder," Plastics, Rubber and Composites, vol. 46, pp. 431-441, 2017.

[58] M. F. Shareef, M. Arslan, N. Iqbal, N. Ahmad, and T. Noor, "Development of Hydrotalcite Based Cobalt Catalyst by Hydrothermal and Co-precipitation Method for Fischer-Tropsch Synthesis," Bulletin of Chemical Reaction Engineering & Catalysis, vol. 12, pp. 357-362, 2017.

[59] S. A. Soomro, I. H. Gul, M. Z. Khan, H. Naseer, and A. N. Khan, "Dielectric properties evaluation of NiFe 2 O 4/MWCNTs nanohybrid for microwave applications prepared via novel one step synthesis," Ceramics International, vol. 43, pp. 4090-4095, 2017.

[60] H. Tian, W. Mi, H. Zhao, M. A. Mohammad, Y. Yang, P. W. Chiu, et al., "A Novel Artificial Synapse with Dual Modes using Bilayer Graphene as the Bottom Electrode," Nanoscale, 2017.

[61] H. Ullah, J. Khan, H. Nasir, A. Muhammad Khan, M. Nawaz, M. Ahmad Bangesh, et al., "Zinc Oxide Nanostructures of Controlled Morphology Prepared from Single Source Precursors by Wet Chemical Route," Journal of the Chemical Society of Pakistan, vol. 39, 2017.

[62] M. ur Rahman, H. U. Wazir, M. Khan, S. Nosheen, S. U. Rahman, and A. Ullah, "Precursor-induced template free hydrothermal synthesis of faujasite and its application in catalytic pyrolysis," Materials Research Express, vol. 4, p. 055009, 2017.

[63] A. Usman, S. Khalid, A. Usman, Z. Hussain, and Y. Wang, "Algal Polysaccharides, Novel Application, and Outlook," in Algae Based Polymers, Blends, and Composites, ed: Elsevier, 2017, pp. 115-153.

[64] Y. Yuan, L. Yang, B. He, E. Pervaiz, Z. Shao, and M. Yang, "Cobalt–zinc nitride on nitrogen doped carbon black nanohybrids as a non-noble metal electrocatalyst for oxygen reduction reaction," Nanoscale, vol. 9, pp. 6259-6263, 2017.

[65] F. Zeb, K. Nadeem, S. K. A. Shah, M. Kamran, I. H. Gul, and L. Ali, "Surface spins disorder in uncoated and SiO 2 coated maghemite nanoparticles," Journal of Magnetism and Magnetic Materials, vol. 429, pp. 270-275, 2017.

[66] M. Zou, L. Feng, E. Pervaiz, A. S. Ganeshraja, T. Gao, H. Jiang, et al., "An Amorphous Mn, N-Codoped TiO2 Microspheres Photocatalyst Induced by High Defects with Greatly Extended Visible-Light-Responsive Range for Photocatalytic Degradation," Nano Advances, vol. 2, pp. 36-46, 2017.