Skip Ribbon Commands
Skip to main content
Research Publications 2018


[1] M. J. Afzal, E. Pervaiz, S. Farrukh, T. Ahmed, Z. Bingxue, and M. Yang, "Highly integrated nanocomposites of RGO/TiO2 nanotubes for enhanced removal of microbes from water," Environmental technology, pp. 1-10, 2018.

[2] I. Ahmad, M. Kano, and S. Hasebe, "Dimensions and analysis of uncertainty in industrial modeling process," Journal of Chemical Engineering of Japan, vol. 51, pp. 533-543, 2018.

[3] N. Ahmad, R. Ahmed, Z. A. Umar, U. Liaqat, U. Manzoor, and M. A. Baig, "Qualitative and quantitative analyses of copper ores collected from Baluchistan, Pakistan using LIBS and LA-TOF-MS," Applied Physics B, vol. 124, p. 160, 2018.

[4] I. Ahmed, M. B. K. Niazi, Z. Jahan, and S. R. Naqvi, "Effect of drying parameters on the physical, morphological and thermal properties of spray-dried inulin," Journal of Polymer Engineering, vol. 38, pp. 775-783, 2018.

[5] M. Ahmed, M. Shahid, Z. Khan, A. Ammar, A. Saboor, A. Khalid, et al., "Electrochemical Comparison of SAN/PANI/FLG and ZnO/GO Coated Cast Iron Subject to Corrosive Environments," Materials, vol. 11, p. 2239, 2018.

[6] Q. U. Ain and A. N. Khan, "Fabrication and characterization of bio‐inspired polymer blends and hybrid composites based on collagen‐type II, polyethylene glycol‐dimethacrylate and hydroxyapatite," Polymer Composites, vol. 39, pp. E550-E560, 2018.

[7] A. U. Akram, I. Ahmad, A. Chughtai, and M. Kano, "Exergy analysis and optimisation of naphtha reforming process with uncertainty," International Journal of Exergy, vol. 26, pp. 247-262, 2018.

[8] I. Ali, S. R. Naqvi, and A. Bahadar, "Kinetic analysis of Botryococcus braunii pyrolysis using model-free and model fitting methods," Fuel, vol. 214, pp. 369-380, 2018.

[9] S. S. Ali Shah, H. Mustafa, H. Nasir, and A. Hussain, "Synthesis and Characterizations of Epoxy/Graphene Oxide/Carbon Fiber Nanocomposites Polymer/graphene composite," Journal of the Chemical Society of Pakistan, vol. 40, 2018.

[10] A. Ammar, M. Shahid, M. Ahmed, M. Khan, A. Khalid, and Z. Khan, "Electrochemical study of polymer and ceramic-based nanocomposite coatings for corrosion protection of cast iron pipeline," Materials, vol. 11, p. 332, 2018.

[11] B. Ara, M. Muhammad, M. Salman, R. Ahmad, and N. Islam, "Preparation of microspheric Fe (III)-ion imprinted polymer for selective solid phase extraction," Applied water science, vol. 8, p. 41, 2018.

[12] M. U. Ashraf, M. A. Hussain, S. Bashir, M. T. Haseeb, and Z. Hussain, "Quince seed hydrogel (glucuronoxylan): Evaluation of stimuli responsive sustained release oral drug delivery system and biomedical properties," Journal of Drug Delivery Science and Technology, vol. 45, pp. 455-465, 2018.

[13] S. Ata, M. Z. Ullah, M. I. Din, R. Mehmood, W. Farooq, S. A. Trimzi, et al., "Novel synthesis and enhanced catalytic performance of stable nano-scale Fe-0, Ag-0 and ZnO nanoparticles: photo-degradation under mercury lamp," DESALINATION AND WATER TREATMENT, vol. 131, pp. 212-219, 2018.

[14] A. Azam, M. N. A. Khan, N. Mehmood, S. Radenović, and T. Došenović, "Coincidence point of L-fuzzy sets endowed with graph," Revista de la Real Academia de Ciencias Exactas, Físicas y Naturales. Serie A. Matemáticas, pp. 1-17, 2017.

[15] R. Bashir, A. Makhdoom, M. K. Bilal, and M. A. Badar, "Comparative study of the photovoltaic behavior of ruthenium and the other organic and inorganic Dye-Sensitized Solar Cells (DSSC)," Optik, vol. 157, pp. 11-15, 2018.

[16] H. T. Bhatti, N. M. Ahmad, M. B. Khan Niazi, U. R. Alvi, M. Azeem, N. Ahmad, et al., "Graphene oxide-PES-based mixed matrix membranes for controllable antibacterial activity against salmonella typhi and water treatment," International Journal of Polymer Science, vol. 2018, 2018.

[17] W. A. Cheema, H. R. Andersen, and K. M. Kaarsholm, "Improved DBP elimination from swimming pool water by continuous combined UV and ozone treatment," Water research, vol. 147, pp. 214-222, 2018.

[18] M. Durrani, I. Ahmad, M. Kano, and S. Hasebe, "An Artificial Intelligence Method for Energy Efficient Operation of Crude Distillation Units under Uncertain Feed Composition," Energies, vol. 11, p. 2993, 2018.

[19] T. Ghani, M. Mujahid, M. Mehmood, and G. Zhang, "Fabrication of self-branched TiO 2 nanotubes by anodization method, ordering and crystallinity," Journal of Porous Materials, pp. 1-11, 2018.

[20] Z. Hameed, Z. Aman, S. R. Naqvi, R. Tariq, I. Ali, and A. A. Makki, "Kinetic and Thermodynamic Analyses of Sugar Cane Bagasse and Sewage Sludge Co-pyrolysis Process," Energy & fuels, vol. 32, pp. 9551-9558, 2018.

[21] S. Haq, W. Rehman, M. Waseem, R. Javed, and M. Shahid, "Effect of heating on the structural and optical properties of TiO 2 nanoparticles: antibacterial activity," Applied Nanoscience, vol. 8, pp. 11-18, 2018.

[22] M. T. Haseeb, M. A. Hussain, S. H. Yuk, M. Amin, S. Bashir, and Z. Hussain, "Acetylation of linseed hydrogel: synthesis, characterization, isoconversional thermal analysis and degradation kinetics," CELLULOSE CHEMISTRY AND TECHNOLOGY, vol. 52, pp. 681-688, 2018.

[23] M. A. Hassan, M. Mujahid, L. S. Woei, and L. H. Wong, "Spray pyrolysis synthesized Cu (In, Al)(S, Se) 2 thin films solar cells," Materials Research Express, vol. 5, p. 035506, 2018.

[24] B. He, Y. Yuan, J. Wang, E. Pervaiz, X. Dong, Z. Shao, et al., "Hierarchical Ni 3 ZnN Hollow Microspheres as Stable Non-Noble Metal Electrocatalysts for Oxygen Reduction Reactions," Electrocatalysis, vol. 9, pp. 452-458, 2018.

[25] B. Hussain and M. Ahsan, "A Numerical Comparison of Soave Redlich Kwong and Peng-Robinson Equations of State for Predicting Hydrocarbons’ Thermodynamic Properties," Engineering, Technology & Applied Science Research, vol. 8, pp. 2422-2426, 2018.

[26] M. Irfan, M. B. Khan Niazi, A. Hussain, W. Farooq, and M. H. Zia, "Synthesis and characterization of zinc-coated urea fertilizer," Journal of plant nutrition, vol. 41, pp. 1625-1635, 2018.

[27] M. Islam, A. Achour, K. Saeed, M. Boujtita, S. Javed, and M. Djouadi, "Metal/Carbon Hybrid Nanostructures Produced from Plasma-Enhanced Chemical Vapor Deposition over Nafion-Supported Electrochemically Deposited Cobalt Nanoparticles," Materials, vol. 11, p. 687, 2018.

[28] M. Islam, Y. Khalid, I. Ahmad, A. A. Almajid, A. Achour, T. J. Dunn, et al., "Microstructural Evaluation of Inductively Sintered Aluminum Matrix Nanocomposites Reinforced with Silicon Carbide and/or Graphene Nanoplatelets for Tribological Applications," Metallurgical and Materials Transactions A, vol. 49, pp. 2963-2976, 2018.

[29] Z. Jahan, M. B. K. Niazi, and Ø. W. Gregersen, "Mechanical, thermal and swelling properties of cellulose nanocrystals/PVA nanocomposites membranes," Journal of industrial and engineering chemistry, vol. 57, pp. 113-124, 2018.

[30] Z. Jahan, M. B. K. Niazi, M.-B. Hägg, and Ø. W. Gregersen, "Cellulose nanocrystal/PVA nanocomposite membranes for CO2/CH4 separation at high pressure," Journal of membrane science, vol. 554, pp. 275-281, 2018.

[31] Z. Jahan, M. B. K. Niazi, M.-B. Hägg, and Ø. W. Gregersen, "Decoupling the effect of membrane thickness and CNC concentration in PVA based nanocomposite membranes for CO2/CH4 separation," Separation and Purification Technology, vol. 204, pp. 220-225, 2018.

[32] F. Javed, S. Javed, M. A. Akram, M. Mujahid, M. Islam, and A. S. Bhatti, "Surface plasmon mediated optical properties of ZnO/Au/TiO2 nanoheterostructure rod arrays," Materials Science and Engineering: B, vol. 231, pp. 32-39, 2018.

[33] S.-J. Jeong, D.-H. Lim, M. Saleem, B.-G. Koo, and M.-S. Kim, "Properties of CuAg/(BiNaSr) TiO3 multilayer ceramic actuator," Ceramics International, vol. 44, pp. S112-S116, 2018.

[34] A. Jilani, M. H. D. Othman, M. O. Ansari, S. Z. Hussain, A. F. Ismail, and I. U. Khan, "Graphene and its derivatives: synthesis, modifications, and applications in wastewater treatment," Environmental chemistry letters, vol. 16, pp. 1301-1323, 2018.

[35] A. Jilani, M. H. D. Othman, M. O. Ansari, R. Kumar, I. U. Khan, M. S. Abdel-wahab, et al., "Structural, optical, and photocatalytic investigation of nickel oxide@ graphene oxide nanocomposite thin films by RF magnetron sputtering," Journal of materials science, vol. 53, pp. 15034-15050, 2018.

[36] A. Jilani, M. H. D. Othman, M. O. Ansari, M. Oves, A. Alshahrie, I. U. Khan, et al., "A simple route to layer-by-layer assembled few layered graphene oxide nanosheets: optical, dielectric and antibacterial aspects," Journal of Molecular Liquids, vol. 253, pp. 284-296, 2018.

[37] A. Khan, A. Q. Malik, Z. H. Lodhi, and Z. U. Abdin, "Effect of body material and temperature variation on the performance of the time delay pyrotechnic compositions," Defence technology, vol. 14, pp. 261-265, 2018.

[38] A. Khan, A. Q. Malik, Z. H. Lodhi, and G. Badshah, "Study of effect of binders and loading pressures on the performance of the time delay pyrotechnic compositions," Journal of Energetic Materials, vol. 36, pp. 386-397, 2018.

[39] A. Khan, A. Q. Malik, Z. H. Lodhi, and S. A. Hussain, "Development and Parametric Study of B/BaCrO4/FG Pyrotechnic Delay Composition," Combustion Science and Technology, vol. 190, pp. 823-833, 2018.

[40] I. U. Khan, M. H. D. Othman, A. Ismail, N. Ismail, J. Jaafar, H. Hashim, et al., "Structural transition from two-dimensional ZIF-L to three-dimensional ZIF-8 nanoparticles in aqueous room temperature synthesis with improved CO2 adsorption," Materials Characterization, vol. 136, pp. 407-416, 2018.

[41] I. U. Khan, M. H. D. Othman, A. Ismail, T. Matsuura, H. Hashim, N. A. H. M. Nordin, et al., "Status and improvement of dual-layer hollow fiber membranes via co-extrusion process for gas separation: A review," Journal of Natural Gas Science and Engineering, vol. 52, pp. 215-234, 2018.

[42] I. U. Khan, M. H. D. Othman, J. Jaafar, H. Hashim, A. F. Ismail, M. A. Rahman, et al., "RAPID SYNTHESIS AND CHARACTERIZATION OF LEAF-LIKE ZEOLITIC IMIDAZOLATE FRAMEWORK," Malaysian Journal of Analytical Sciences, vol. 22, pp. 553-560, 2018.

[43] I. U. Khan, M. H. D. Othman, A. Jilani, A. Ismail, H. Hashim, J. Jaafar, et al., "Economical, environmental friendly synthesis, characterization for the production of zeolitic imidazolate framework-8 (ZIF-8) nanoparticles with enhanced CO2 adsorption," Arabian Journal of Chemistry, vol. 11, pp. 1072-1083, 2018.

[44] M. Khan, A. A. Khurram, T. Li, T. Zhao, T. Subhani, I. Gul, et al., "Synergistic effect of organic and inorganic nano fillers on the dielectric and mechanical properties of epoxy composites," Journal of Materials Science & Technology, vol. 34, pp. 2424-2430, 2018.

[45] M. Z. Khan, M. T. Mehran, R.-H. Song, J.-W. Lee, S.-B. Lee, and T.-H. Lim, "A simplified approach to predict performance degradation of a solid oxide fuel cell anode," Journal of Power Sources, vol. 391, pp. 94-105, 2018.

[46] M. Z. Khan, M. T. Mehran, R.-H. Song, S.-B. Lee, and T.-H. Lim, "Effects of applied current density and thermal cycling on the degradation of a solid oxide fuel cell cathode," International Journal of Hydrogen Energy, vol. 43, pp. 12346-12357, 2018.

[47] R. Khan, S. Javed, and M. Islam, "Hierarchical Nanostructures of Titanium Dioxide: Synthesis and Applications," in Titanium Dioxide-Material for a Sustainable Environment, ed: IntechOpen, 2018.

[48] S. N. Khan, S. M. Hailegiorgis, Z. Man, S. Garg, A. M. Shariff, S. Farrukh, et al., "High-pressure absorption study of CO2 in aqueous N-methyldiethanolamine (MDEA) and MDEA-piperazine (PZ)-1-butyl-3-methylimidazolium trifluoromethanesulfonate [bmim][OTf] hybrid solvents," Journal of Molecular Liquids, vol. 249, pp. 1236-1244, 2018.

[49] Z. Khan and Z. A. Khan, "Experimental and numerical investigations of nano-additives enhanced paraffin in a shell-and-tube heat exchanger: A comparative study," Applied Thermal Engineering, vol. 143, pp. 777-790, 2018.

[50] A. Khurram, A. Khan, R. Hussain, and I. Gul, "Enhancement of dielectric constant of graphene–epoxy composite by inclusion of nanodiamond particles," Journal of Electronic Materials, vol. 47, pp. 1713-1720, 2018.

[51] B.-K. Koo, M. Saleem, D.-H. Lim, M.-S. Kim, I.-S. Kim, and S.-J. Jeong, "Fabrication of borosilicate-glass-coated CuAg inner electrode for multilayer ceramic actuator," Sensors and Actuators A: Physical, vol. 277, pp. 8-17, 2018.

[52] D.-H. Lim, M. Saleem, I.-s. Kim, M.-S. Kim, B.-K. Koo, and S.-J. Jeong, "Frequency dependence of polarization and strain in Bi0. 5Na0. 5TiO3-SrTiO3/Bi0. 5 (Na0. 8K0. 2) 0.5 TiO3 composites," Sensors and Actuators A: Physical, vol. 282, pp. 163-173, 2018.

[53] X. Luo, J. Xu, Y. Wang, Y. Yang, M. Umer, and S. Zhang, "Effect of solution and aging treatment on the microstructure and tensile properties of SiCf/C/Mo/Ti2AlNb composites," Intermetallics, vol. 95, pp. 33-39, 2018.

[54] T. Malik, S. Naveed, M. Muneer, and M. Ali Mohammad, "Fabrication and Characterization of Laser Scribed Supercapacitor Based on Polyimide for Energy Storage," in Key Engineering Materials, 2018, pp. 181-186.

[55] M. Mansoor and M. Shahid, "Stress relaxation behavior of annealed aluminum-carbon nanotube composite," Science and Engineering of Composite Materials, vol. 25, pp. 1015-1019, 2018.

[56] A. Maqbool, R. A. Malik, A. Hussain, F. Akram, M. A. Rafiq, M. Saleem, et al., "Evolution of ferroelectric and piezoelectric response by heat treatment in pseudocubic BiFeO 3–BaTiO 3 ceramics," Journal of Electroceramics, vol. 41, pp. 99-104, 2018.

[57] M. T. Mehran, M. Z. Khan, S.-B. Lee, T.-H. Lim, S. Park, and R.-H. Song, "Improving sulfur tolerance of Ni-YSZ anodes of solid oxide fuel cells by optimization of microstructure and operating conditions," international journal of hydrogen energy, vol. 43, pp. 11202-11213, 2018.

[58] M. T. Mehran, M. Z. Khan, T.-H. Lim, S.-B. Lee, and R.-H. Song, "Effect of nano-Al2O3 addition on mechanical durability of nickel-yttria stabilized zirconia anode support of solid oxide fuel cells," Ceramics International, vol. 44, pp. 14824-14833, 2018.

[59] K. Muazim and Z. Hussain, "A Comparative Approach to Graphene Oxide Nanocomposites as Peroxidase Mimetic Catalysts," Nanoscience and Nanotechnology Letters, vol. 10, pp. 873-881, 2018.

[60] A. Mukhtar and H. Nasir, "Comparative Closed Vessel Firing-Ballistic Parameters Evaluation for Development of Base Bleed Composite Solid Propellant," Engineering, Technology & Applied Science Research, vol. 8, pp. 3545-3549, 2018.

[61] A. Mukhtar, H. Nasir, and H. Waheed, "Pressure-Time Study of Slow Burning Rate AP/HTPB Based Composite Propellant by Using Closed Vessel Test (CVT)," in Key Engineering Materials, 2018, pp. 268-274.

[62] K. Naeem and A. Hussain, "Numerical and experimental study of wave shaper effects on detonation wave front," Defence technology, vol. 14, pp. 45-50, 2018.

[63] M. Naqvi, E. Dahlquist, J. Yan, S. Naqvi, A. Nizami, C. A. Salman, et al., "Polygeneration system integrated with small non-wood pulp mills for substitute natural gas production," Applied energy, vol. 224, pp. 636-646, 2018.

[64] S. Naqvi, H. M. Prabhakara, E. Bramer, W. Dierkes, R. Akkerman, and G. Brem, "A critical review on recycling of end-of-life carbon fibre/glass fibre reinforced composites waste using pyrolysis towards a circular economy," Resources, conservation and recycling, vol. 136, pp. 118-129, 2018.

[65] S. R. Naqvi, A. Bibi, M. Naqvi, T. Noor, A.-S. Nizami, M. Rehan, et al., "New trends in improving gasoline quality and octane through naphtha isomerization: a short review," Applied Petrochemical Research, vol. 8, pp. 131-139, 2018.

[66] S. R. Naqvi, S. Jamshaid, M. Naqvi, W. Farooq, M. B. K. Niazi, Z. Aman, et al., "Potential of biomass for bioenergy in Pakistan based on present case and future perspectives," Renewable and Sustainable Energy Reviews, vol. 81, pp. 1247-1258, 2018.

[67] S. R. Naqvi and M. Naqvi, "Catalytic fast pyrolysis of rice husk: influence of commercial and synthesized microporous zeolites on deoxygenation of biomass pyrolysis vapors," International Journal of Energy Research, vol. 42, pp. 1352-1362, 2018.

[68] S. R. Naqvi, R. Tariq, Z. Hameed, I. Ali, S. A. Taqvi, M. Naqvi, et al., "Pyrolysis of high-ash sewage sludge: Thermo-kinetic study using TGA and artificial neural networks," Fuel, vol. 233, pp. 529-538, 2018.

[69] S. Naveed, T. Malik, M. Muneer, and M. Ali Mohammad, "A Laser Scribed Graphene Oxide and Polyimide Hybrid Strain Sensor," in Key Engineering Materials, 2018, pp. 169-174.

[70] T. Niaz, S. Shabbir, T. Noor, R. Abbasi, Z. A. Raza, and M. Imran, "Polyelectrolyte multicomponent colloidosomes loaded with nisin Z for enhanced antimicrobial activity against foodborne resistant pathogens," Frontiers in microbiology, vol. 8, p. 2700, 2018.

[71] T. Niaz, S. Shabbir, T. Noor, A. Rahman, H. Bokhari, and M. Imran, "Potential of polymer stabilized nano-liposomes to enhance antimicrobial activity of nisin Z against foodborne pathogens," LWT, vol. 96, pp. 98-110, 2018.

[72] E. Pervaiz, M. S. A. Virk, A. K. Tareen, B. Zhang, Q. Zhao, Z. Wang, et al., "Magnetic micro scavengers: highly porous Ni1− x Co x Fe2O4 microcubes for efficient disintegration of nitrophenol," Nanotechnology, vol. 29, p. 215710, 2018.


[74] F. Qazi, Z. Hussain, S. Asghar, G. Abbas, and M. Riaz, "Malus domestica Mediated Synthesis of Palladium Nanoparticles and Investigation of Their Catalytic Activity Towards the Suzuki Coupling Reactions," Nanoscience and Nanotechnology Letters, vol. 10, pp. 373-377, 2018.

[75] M. Riaz, M. Altaf, M. Q. Khan, S. Manzoor, M. A. Shekheli, M. A. Shah, et al., "Green Synthesis of Silver Nanoparticles Using Jurinea dolomiaea and Biological Activities," Journal of nanoscience and nanotechnology, vol. 18, pp. 8386-8391, 2018.

[76] A. Saboor, A. N. Khan, R. Jan, S. Sharif, and M. Khan, "Mechanical, dielectric and EMI shielding response of styrene acrylonitrile, styrene acrylonitrile/polyaniline polymer blends, upon incorporation of few layer graphene at low filler loadings," Journal of Polymer Research, vol. 25, p. 248, 2018.

[77] W. Saeed, N. Shoaib, H. M. Cheema, and M. U. Khan, "RF energy harvesting for ubiquitous, zero power wireless sensors," International Journal of Antennas and Propagation, vol. 2018, 2018.

[78] Z. Salahuddin, S. Farrukh, and A. Hussain, "Optimization study of polyethylene glycol and solvent system for gas permeation membranes," International Journal of Polymer Analysis and Characterization, vol. 23, pp. 483-492, 2018.

[79] H. Saleem, M. Haneef, and H. Y. Abbasi, "Synthesis route of reduced graphene oxide via thermal reduction of chemically exfoliated graphene oxide," Materials Chemistry and Physics, vol. 204, pp. 1-7, 2018.

[80] M. Saleem, L. D. Hwan, I.-s. Kim, M.-S. Kim, A. Maqbool, U. Nisar, et al., "Revealing of Core Shell Effect on Frequency-Dependent Properties of Bi-based Relaxor/Ferroelectric Ceramic Composites," Scientific reports, vol. 8, p. 14146, 2018.

[81] A. Sarosh, A. Hussain, E. Pervaiz, and M. Ahsan, "Computational Fluid Dynamics (CFD) Analysis of Phthalic Anhydride’s Yield Using Lab Synthesized and Commercially Available (V2O5/TiO2) Catalyst," Engineering, Technology & Applied Science Research, vol. 8, pp. 2821-2826, 2018.

[82] M. S. Sarwar, M. B. K. Niazi, Z. Jahan, T. Ahmad, and A. Hussain, "Preparation and characterization of PVA/nanocellulose/Ag nanocomposite films for antimicrobial food packaging," Carbohydrate polymers, vol. 184, pp. 453-464, 2018.

[83] S. S. A. Shah, H. Nasir, and A. Saboor, "Improved dielectric properties of polyetherimide and polyaniline-coated few-layer graphene based nanocomposites," Journal of Materials Science: Materials in Electronics, vol. 29, pp. 402-411, 2018.

[84] S. S. A. Shah, H. Nasir, and N. Ul-Haq, "Synthesis of Cyanate Ester Based Thermoset Resin by Using Copper (II) Oxalate as Catalyst and its Application in Carbon Fiber Composites," in Nano Hybrids and Composites, 2018, pp. 1-9.

[85] S. Shahzad, D. Ali, J. Asif, M. Z. Khan, M. A. Akram, S. Javed, et al., "Effect of Ethane-1, 2-Diamine on Growth of ZnO Nanorods and Cyclohexane Sensing by Current-Voltage Characteristics Investigations," in Key Engineering Materials, 2018, pp. 126-131.

[86] K. Shaker, Y. Nawab, A. Saouab, M. Ashraf, and A. N. Khan, "Effect of silica particle loading on shape distortion in glass/vinyl ester-laminated composite plates," The journal of the Textile Institute, vol. 109, pp. 656-664, 2018.

[87] M. Shehzad and T. Malik, "Antiferroelectric Behavior of P (VDF-TrFE) and P (VDF-TrFE-CTFE) Ferroelectric Domains for Energy Harvesting," ACS Applied Energy Materials, vol. 1, pp. 2832-2840, 2018.

[88] M. Siyar, J.-Y. Cho, Y. Youn, S. Han, M. Kim, S.-H. Bae, et al., "Effect of annealing temperature on the phase transition, band gap and thermoelectric properties of Cu 2 SnSe 3," Journal of Materials Chemistry C, vol. 6, pp. 1780-1788, 2018.

[89] H. Tian, L. Li, M. A. Mohammad, X. Wang, Y. Yang, and T.-L. Ren, "High-Quality Reconfigurable Black Phosphorus pn Junctions," IEEE Transactions on Electron Devices, vol. 65, pp. 5118-5122, 2018.

[90] H. Tian, X.-F. Wang, M. A. Mohammad, G.-Y. Gou, F. Wu, Y. Yang, et al., "A hardware Markov chain algorithm realized in a single device for machine learning," Nature communications, vol. 9, p. 4305, 2018.

[91] Z. A. Umar, N. Ahmed, R. Ahmed, U. Liaqat, and M. A. Baig, "Elemental composition analysis of granite rocks using LIBS and LA-TOF-MS," Applied optics, vol. 57, pp. 4985-4991, 2018.

[92] B. Uzair, A. Bano, M. B. K. Niazi, F. Khan, G. M. Shah, U. Habiba, et al., "In vitro antifungal activity of 9, 10-dihydrophenanthrene-2-carboxylic acid isolated from a marine bacterium: Pseudomonas putida," Pakistan journal of pharmaceutical sciences, vol. 31, pp. 2733-2736, 2018.

[93] H. Waheed, F. T. Minhas, and A. Hussain, "Cellulose acetate/sericin blend membranes for use in dialysis," Polymer Bulletin, vol. 75, pp. 3935-3950, 2018.

[94] W. Xu, A. Hussain, and Y. Liu, "A review on modification methods of adsorbents for elemental mercury from flue gas," Chemical Engineering Journal, vol. 346, pp. 692-711, 2018.

[95] W. Yang, A. Hussain, J. Zhang, and Y. Liu, "Removal of elemental mercury from flue gas using red mud impregnated by KBr and KI reagent," Chemical Engineering Journal, vol. 341, pp. 483-494, 2018.

[96] K. Yaqoob, J.-C. Crivello, and J.-M. Joubert, "Thermodynamic modeling of the Mo–Ni system," Calphad, vol. 62, pp. 215-222, 2018.

[97] M. U. Zahid, E. Pervaiz, A. Hussain, M. I. Shahzad, and M. B. K. Niazi, "Synthesis of carbon nanomaterials from different pyrolysis techniques: a review," Materials Research Express, vol. 5, p. 052002, 2018.

[98] S. Zehra, I. H. Gul, and Z. Hussain, "Liquid crystal based optical platform for the detection of Pb2+ ions using NiFe2O4 nanoparticles," Results in Physics, vol. 9, pp. 1462-1467, 2018.​